Charge-out rate vs hourly rate: what your hour must earn
Day rates are usually a guess. Work backwards from overheads and the profit you want, and the number that comes out is often higher than the one being charged.
Ask a tradesperson what they charge a day and most can tell you immediately. Ask how they arrived at it and the answer is usually the same: it is what the last firm paid, or what a competitor charges, or what felt safe.
That number is almost never built from the two things that decide whether the year works: what the business costs to run, and how many hours can actually be sold.
The calculation, in three steps
Take a one-person building firm:
| Overheads per year | £18,000 |
| Profit wanted, before tax | £32,000 |
| Billable hours per year | 1,650 |
Step one — what the business costs per hour.
£18,000 ÷ 1,650 = £10.91 an hour just to stand still.
Step two — what the year has to earn per hour.
£50,000 ÷ 1,650 = £30.30 an hour. That is the break-even rate that covers overheads and pays the profit target. Charge less and the year does not work, however busy it looks.
Step three — allow for the hours you will not bill.
£30.30 is the floor, not the rate. On a job with a 15% margin allowance you charge £35.65 an hour, and a 7.5-hour day comes out at £267.
Run it with your own numbers. The charge-out rate calculator does this same sum from your overheads, your days and the share of the day you can genuinely bill — and shows what the rate has to become when that share falls, which is the line most rate calculations leave out.
Why 1,650 hours, and not 2,080
This is the number most people get wrong, and it is the one that does the most damage.
A year is about 2,080 working hours before anything is taken out. Remove holidays, bank holidays, sick days, quoting evenings, travel between jobs, van maintenance, and the days the weather stops work — and a self-employed tradesperson who is busy typically bills somewhere between 1,500 and 1,700 hours.
Assume 2,080 and every rate you calculate is about 20% too low. Assume 1,650 and the rate reflects the year you will actually have.
The honest question is not “how many hours could I work” but “how many hours did I invoice last year”. If you have the records, use the real figure. If you do not, use the low end.
What the rate is not
It is not the price of the job. A rate is an input. The quote is where materials, preliminaries, risk and the value of the finished work to that particular customer get added. A firm charging £35.65 an hour can quote £900 for a day’s work if the day produces something worth £900.
It is not a ceiling on what you earn. If the market will pay more, charge more. The calculation tells you the point below which a job is losing money — which is the only thing it has to do.
It does not include the VAT. If you are VAT registered, the rate is net. Quoting the gross figure as your rate is a common way of quietly working for 17% less.
The two mistakes that follow a wrong rate
Winning work at a loss. A rate below the break-even figure means every job won is a job that costs money to deliver. Busy and losing is the most exhausting way to fail, because the feedback looks positive — the diary is full.
Chasing turnover instead of margin. A firm that adds jobs to cover the shortfall usually adds the travel, the coordination and the unpaid quoting that made the rate wrong in the first place.
How to use it in practice
Recalculate the rate once a year, at the point you set your prices rather than after a bad month. Then check it against real quotes: take the last job you quoted, put the actual hours against it, and see whether the margin you assumed is the margin you earned. Nearly every firm that does this finds one job type that has been quietly losing money for a year.
The thresholds and tax treatment referenced above are the ones in force when this was written; check current rates on GOV.UK. This is general information, not financial advice.
The calculator below does the three steps with your own overheads, hours and margin, and keeps a margin check against a real quote so the number is tested rather than assumed.
If you price contracts rather than hours, the rate is only half of it: adding 25% to a cost is not a 25% margin, and the difference is where the profit goes.
General information only, not tax or financial advice. Every guide links to the current GOV.UK page for the rules it applies.